|
Notes:
1. Supplied in half pieces –These profiles
may be install per half or adjoined together as a complete
column profile. The profiles are non –Load bearing various
pieces may be installed surrounding a structural beam. Height
requirement are achieved by adjoining and stacked the halves
together upon installation. All joints and seams are to be
meshed in place with fiberglass re-inforcing mesh and coated
with a polymer modified basecoat for a seamless installation.
2. All profiles are manufactured as an 8’-0”
length. (Dim-‘A’)
3. Standard Diameter’s of each column
are 10”, 12”, 14”, 16”, 18”,
20”, 22”, 24” (Dim- ‘B’) 8”
are Un-available
4. Larger sizes of diameters are available upon
request.
5. Columns have a standard center cutout which
allows for a structural support of 4”X4” Custom
requirements for larger structural columns, or offset center
cutouts are available upon request. |
